The air compressor system is a whole system, which contains a variety of equipment and pipelines. Many times everyone ignores the problem of the pipeline. In fact, the pipeline plays a vital role in the normal operation of the entire system. The shortcomings are all caused by pipe sealing problems. Part of the pipeline is unreasonable in design, and it is prone to blockage during long-term use. Today, I will show you how to choose the air compressor hose.
(1) Increase the length of the hose as much as possible! Many compressor manufacturers have artificially reduced the length of the hose in their design in order to save space in the machine. In order to save costs, I don’t know if this is
In the future, the potential damage to the life of the hose when the machine is running!
The design should follow the following principles:
1. The length of stainless steel metal hose Φ10-25 or not shorter than 200mm,
2. Φ25-64 should be no shorter than 350mm, flange connection can be 400mm
3. The above Φ64 is not shorter than 800mm
Rubber hose Φ10-25 can be designed according to 400MM, and Φ32 can be no shorter than 15CM
(2) Key points for the selection of metal hoses and rubber hoses:
Ordinary air compressors can choose metal hoses and rubber hoses at will. Relatively speaking, stainless steel metal hoses have higher temperature resistance, and there is no problem with operation at relatively high temperatures. Choosing stainless steel metal hoses improves the machine. The brand advantage is very helpful, but there is not much advantage to the high pressure medium and high pressure piston machine, because the stainless steel metal hose cannot withstand too much pressure.