Many large air compressors need to be installed in special rooms, and the humidity, temperature, ventilation and other factors in the room will affect the use of the air compressor, so what issues should we pay attention to for the management of the air compressor room?
1. Choose a wide, well-lit, ventilated and ventilated site to ensure sufficient space for maintenance, which is conducive to the space and lighting required for the operation, maintenance and repair of the screw air compressor.
2. The air compressor room should keep the ground clean and free of debris, especially flammable and explosive products, and should be equipped with fire extinguishers and other facilities to ensure the safety of the room.
3. The air compressor room needs to maintain a suitable room temperature, which should not be higher than 35℃ and should not be lower than 0℃. Note that the temperature of the air compressor room should be kept as low as possible. The air compressor absorbs higher temperature air, which will reduce the exhaust air volume.
4. The place where the machine room is located should be kept dry, well ventilated, and clean, so as to reduce damage to the screw air compressor and prolong its service life. Air compressors must not inhale corrosive gases, paint molecules, and gases that are explosive or chemically unstable or steam, so as not to endanger the air compressor users or cause rapid damage to the unit.
5. The operator shall operate and maintain the air compressor only after professional training of the air compressor. In the event of a change, the equipment after-sales service personnel or professional air compressor maintenance personnel must be notified immediately. At ordinary times, attention should be paid to regular maintenance and maintenance of the parts of the air compressor, so that the machinery and equipment are in the best operating state.
6. The pressure pipeline in the air compressor room is strictly forbidden to knock, and it is strictly forbidden to disassemble and install under the condition of electrification and pressure.
7. Even in a reasonable use environment, the compressed air will still contain a large amount of water and trace oil, which will reduce the production efficiency and product quality of the enterprise, and the untreated air cannot be directly used for breathing air or For food contact, it is necessary to install the corresponding compressed air purification treatment equipment.
8. For maintenance and repair work, it is best to purchase the product through a company with a certain degree of credit and rich experience, so as to avoid various problems after the screw machine is installed in the machine room in the later stage.
As a kind of power equipment that has been widely used, air compressors also have many details to pay attention to in their maintenance. Therefore, doing a good job in the management of the air compressor room is a very important lesson for air compressor maintenance and maintenance.