Waterproof and moisture-proof measures for air compressor in rainy season:
1. Avoid water sources when placing the air compressor. In the rainy and wet seasons, the wear degree and corrosion area of the air compressor accessories are relatively increased. In addition, there is a water source near the air compressor, which increases the risk, and it is necessary to avoid placing the air compressor in a humid environment.
2. Configure a cold dryer. Long-term rainfall increases the moisture content of the air, which affects volumetric efficiency. As we all know, air can be compressed, but water cannot. If there is too much moisture in the air, the pure air contained in the unit volume of gas will naturally decrease, resulting in insufficient gas production of the air compressor. During daily inspection, the drain valve should be checked in time to keep the drainage smooth to ensure that the water can be discharged in time. Configure the cold dryer: The function of the cold dryer is to remove the moisture in the air, configure the cold dryer, check the working state of the cold dryer, and ensure that the dryer is in the best operating state.
3. Regular maintenance of the air compressor. In humid weather, there is too much moisture in the air, and after mixing with lubricating oil during the compression process, it is easy to reduce the lubrication efficiency and increase the wear of parts (such as rotors).
Therefore, more attention should be paid to checking and replacing the lubricating oil, and maintaining the air compressor in time.
Before starting the air compressor, pay attention to check whether the air compressor equipment has water and whether the circuit is in good condition, so as to prevent rainwater from entering the shower room and burning out the electrical components of the air compressor.
4. Strengthen the management of the air compressor station. In many factories, the air compressor room and the gas workshop are separated, and the structure is relatively simple. In order to make the air in the air compressor room smooth, most of the air compressor rooms are not sealed. This is prone to water leakage, rain leakage and other phenomena, which affect the operation of the air compressor and stop working. Affected by weather such as heavy rain and strong wind, if the base of the gas storage is not reinforced, it may be hung upside down by the strong wind, affecting the gas consumption of enterprises and causing losses.
Therefore, the doors and windows of the air compressor room should be checked and the leak points should be assessed. Waterproof measures should be taken around the air compressor room. The staff should strengthen the inspection work, paying special attention to the power supply part of the air compressor.