2024-05-09 16:02:19

How to cool down the medium pressure screw air compressor

After a medium-pressure air compressor has been used for a long time, the temperature of the medium-pressure air compressor body may suddenly rise at some point. How should we solve this problem?

 

1) It depends on the machine itself. The appearance of the machine may be covered with dust and oil. We need to clean the appearance of the medium-pressure air compressor frequently to maintain good heat dissipation efficiency.

 

2) Check if it is a problem with the cooler: The outside of your cooler has been cleaned, but the inside has not been cleaned. The oily part inside the cooler will accumulate grease over time, which will cause the cooler to leak oil. area, causing your oil temperature to be high. It is recommended to clean the entire machine or perform maintenance on the medium-pressure air compressor.

 

3) Take a look at the fan of the medium-pressure air compressor. If the fan of the medium-pressure air compressor accumulates too much dust and affects heat dissipation, it will also cause the temperature of the medium-pressure air compressor to be too high.

 

Fourth, we should also pay attention to the operating environment of the medium-pressure air compressor. Generally, the normal temperature is higher than 45 degrees.

 

The last reason for the excessive temperature of the medium-pressure air compressor is relatively rare, but it cannot be ruled out that it is a temperature sensor failure or a computer version failure, because a temperature sensor failure is almost never broken. The two faults of domestic medium-pressure air compressors are relatively high.


In order to prevent the temperature of the medium-pressure air compressor from being too high, there are several suggestions:

 

1. The environment of the machine should be in a ventilated place with little dust.

 

2. If you don’t have such conditions, you have to find a way to make a ventilation pipe. Connect this ventilation pipe to the exhaust port of the machine and connect it to the outdoors. This can ensure that the indoor temperature drops, and the temperature of the medium-pressure air compressor will also be lowered.

 

3. Perform regular maintenance on the medium-pressure air compressor to keep all parts clean, such as oil filter blockage, temperature control valve failure, etc. These will lead to high temperatures in the medium-pressure air compressor.