2024-10-09 13:17:56

How to cool down a medium-pressure screw air compressor

After a medium-pressure air compressor has been used for a long time, the temperature of the medium-pressure air compressor body may suddenly rise at some point. How should we solve this problem?


1) It depends on the machine itself. The surface of the machine may be covered with dust and oil. We need to clean the surface of the medium-pressure air compressor body frequently to maintain good heat dissipation efficiency.


2) See if it is a problem with the cooler: the surface of your cooler has been cleaned, but the inside has not been cleaned. The oil flow part of the cooler will accumulate grease over time, which will block the oil flow area of the cooler and cause your oil temperature to be high. It is recommended to clean the whole machine or maintain the medium-pressure air compressor.


3) Check the fan of the medium-pressure air compressor. If the fan of the medium-pressure air compressor accumulates too much dust and affects heat dissipation, it will also cause the temperature of the medium-pressure air compressor to be too high.


Fourth, pay attention to the use environment of the medium-pressure air compressor. The normal temperature is generally higher than 45 degrees.


The last reason for the high temperature of the medium-pressure air compressor is relatively rare, but it is not ruled out that there is such a reason, that is, the temperature sensor failure or the computer version failure, because the temperature sensor failure is almost never broken. The two faults of the domestic medium-pressure air compressor are high.


In order to prevent the temperature of the medium-pressure air compressor from being too high, there are several suggestions:


1. The environment of the machine should be in a ventilated and dust-free place.


2. If there is no such condition, you have to find a way to make a ventilation pipe, connect this ventilation pipe to the exhaust port of the machine, and connect it to the outdoors, so that the indoor temperature can be reduced, and the temperature of the medium-pressure air compressor will also be lower.


3. Regularly maintain the medium-pressure air compressor to keep all parts clean, such as oil filter blockage, temperature control valve failure, etc. These will cause the medium-pressure air compressor to be high temperature.