When we use the air compressor in our daily life, the oil-gas separator is an important component. So how to judge whether the oil-gas separator is blocked? Let me briefly talk about it with you.
How to judge whether the oil-gas separator is blocked? From the changes in the instrument, the pressure, temperature and other changes of the air compressor are related to it. When a fault occurs, no matter how much oil is added, it will definitely not flow to every part of the system, and the lubrication effect will not be achieved. What follows is a sharp increase in friction and high internal temperature, which will cause a series of abnormalities.
Not only the temperature changes, but also the pressure will continue to increase. Overcurrent is also a negative problem caused by oil blockage. In short, the air compressor is definitely not able to operate normally. How to judge: whether the oil pressure increases; current changes; motor overload... In addition to these, the more direct way is to observe from the control panel. When the oil fine separator is really blocked, it will be displayed on it.
Of course, it does not mean that all phenomena must exist to prove blockage. No matter which one occurs, it may be caused by the current problem. In daily life, the filter element itself is a component that is easily damaged. In this regard, more spare parts should be prepared, and records of repairs or replacements should be kept. Regular maintenance can fundamentally reduce the occurrence of failures. By analyzing the data, we can avoid making wrong judgments, which will not only delay the repair speed, but also cause greater economic losses. How to judge whether the oil fine separator is blocked can basically be summarized as follows. No matter what the reason for the downtime is, we must analyze it first and then implement the solution, so as to shorten the time.