For any air compressor, air compressor special oil is the life source of air compressor. It is a necessary guarantee for the operation of the entire air compressor. However, many customers will inevitably encounter oil pipe blockage during the operation of the air compressor. In order to prevent it from being blocked, what preventive measures do we need to take during the installation process?
◆Be sure to clean the oil pipe before installation.
◆If the oil pipe is not long enough, a flexible joint should be installed if it is connected.
◆When bending the pipe, use a pipe bending tool to cold bend or oxyacetylene flame to heat the bend. Care should be taken to prevent flattening or metal overheating and deformation.
◆After the oil pipe and oil injector are assembled, a system strength test should be carried out. The test pressure is 1.5 times the operating pressure. When leakage or rupture is found, it should be repaired or replaced.
◆Before connecting the oiler to the stuffing box and cylinder oil supply points, the oiler should be started first, and the oil supply and cleanliness should be checked at each oil supply point. Only after cleaning can the joints be formally connected.